The S7 Optical Dust Sensor product uses Lambert Beer's law to accurately detect the number and concentration of particles in the ventilation ducts of the vacuum cleaner's handle or extension pole duct, sweeping robot, range hood, particle detection instrument and other equipment.
S7optical dust sensor can be widely used in vacuum cleaners, sweeping robots, scrubbers, mite removal devices, clean room environments and other electrical equipment
Parameters |
Index |
Dust Detection Range |
≥5μm |
Effective range of dust mass concentration |
0~1000mg/m³ |
Dust mass concentration resolution |
1mg/m³ |
Working temperature range |
-10~65℃(No Dewing) |
Storage conditions |
-20~80℃,0~98%(Non condensing) |
Operating Voltage |
DC 5V(power ripple 50mV Max) |
Working curren |
≤30mA |
Standby current |
≤05mA |
Output mode |
PWM、UART |
Mean time to failure(MTTF) |
≥5year |
Receiving board size |
W31.5*H27.5*D5(mm) |
1. The product adopts the separation structure of emission and reception, and has a small size, which is convenient for users to flexibly install and use in various complex structures;
2. High motion measurement accuracy, the minimum detection particle size is 10um when the wind speed is 12m/s;
3. The measurement sensitivity is high, and the response time is less than 0.6s;
4. Wide measurement range: 0-999 and 0--9999 two optional ranges;
5. Low power consumption: the working current is less than 30mA, and the sleep current is less than 0.5mA.
6. The output interface contains 7 colors of particle concentration LED drive levels composed of 3PIN, which can be connected to an external LED indicator;
7. Data particle concentration output interface: PWM, UART can provide real-time high-precision particle concentration data for vacuum cleaners, sweeping robots and other equipment
http://www.luftmysensor.com/